Login

Wheelies are exciting. Loop-outs are not.

A loop-out happens when the bike rotates too far backward during a wheelie. For beginners, the hardest part is not just lifting the front wheel. It is controlling how high it rises, how fast it rises, and when to bring it back down.

That is why Anyland built auto-wheelie control around angle management, not just raw power.

What is WELIXON™ Wheelie-Assist Control System?

Auto-Wheelie Assist is a riding support system designed to make wheelie practice more predictable. Instead of leaving every lift to throttle timing and rider instinct, the system helps monitor the bike’s angle and supports the rider as the front wheel rises.

Think of it as angle guidance for wheelie practice, not a self-riding mode. The rider is still in control, but the bike is helping manage one of the hardest parts of learning: the lift angle.

Co-Designed with Moxin

WELIXON™ is built with Moxin auto-wheelie controller expertise, then tested and fine-tuned specifically for the Anyland Rev Pro’s power system, frame setup, and rider experience.

1. Not Just Any Controller

Most e-dirt bike controllers can manage power, auto-wheelie control requires more: angle data, response timing, and stable output during front-wheel lift. That is why Anyland worked with Moxin instead of relying on a generic controller setup.

2. Built for Anyland Rev Pro

WELIXON™ is tuned for the Rev Pro’s motor, battery, throttle, frame balance, and riding behavior. The goal is not only to make the front wheel rise, but to make the lift feel more predictable.

3. Why Tuning Matters

By co-designing and testing the system as part of the full bike, the WELIXON™ control system delivers smoother, more stable, and more predictable auto-wheelie assistance.

4. Better Compatibility. Smarter Assist.

Use this section to explain a set of product features, to link to a series of pages, or to answer common questions about your products.

How WELIXON™ Works

1. Real-Time Pitch Sensing

The IMU monitors front-end lift and pitch movement in real time.

2. Locks Onto Your Selected Angle

Choose 25°, 35°, or 45° auto-wheelie modes for controlled progression.

3. Adjusts Motor Output to Help Hold Control

The controller fine-tunes motor output to help hold the selected angle and reduce loop-out risk.

Master the Wheelie: Auto vs. Manual

Discover how the WELIXON™ Wheelie-Assist Control System can help prevent loop-outs and help beginners learn to wheelie.

⚡Start

Regular Controller

To wheelie, the rider must manually control the throttle, timing and body positioning.

Auto-Wheelie Controller

Raise the front predictably at a fixed angle.

🛡️Safety

Regular Controller

Mistakes can lead to abrupt loop-out.

Auto-Wheelie Controller

IMU / gyro control fix the pitch angle, reduce loop-out risk.

📈Learning Curve

Regular Controller

Steep learning curve. More time is needed to find the balance point.

Auto-Wheelie Controller

Riders can experience assisted wheelies sooner and learn to balance feeling safer.

👥Best For

Regular Controller

Experienced riders who want full manual control.

Auto-Wheelie Controller

Beginners, casual riders, and anyone who wants an easier, more confidence-friendly wheelie experience.

Built Beyond The Hype

We push our bikes through long-hour endurance, heat, power-output, and battery stress testing to make sure Rev Pro holds up when real riders keep going.

16HRS

Endurance Test

Continuous rider-swap testing. Riders changed, the bike kept running.

34+Miles

Nonstop Run

Continuous ride testing to verify stable output without overheating.

3100+Miles

Road Tested

Long-distance validation with pause intervals to check heat stability and system durability.

50+CYC

Battery Stress

High-load discharge testing to confirm the battery keeps working under repeated power demand.

16HRS

Endurance Test

Continuous rider-swap testing. Riders changed, the bike kept running.

34+Miles

Nonstop Run

Continuous ride testing to verify stable output without overheating.

3100+Miles

Road Tested

Long-distance validation with pause intervals to check heat stability and system durability.

50+CYC

Battery Stress

High-load discharge testing to confirm the battery keeps working under repeated power demand.

Approved by parents

Real families. Real rides.

FAQs

What is WELIXON™?

WELIXON™ is Anyland’s auto-wheelie assist system, co-designed with Moxin and tuned for the Anyland Rev Pro. It helps riders practice wheelies by monitoring the bike’s lift angle and supporting more predictable wheelie behavior through fixed angle settings.

Does WELIXON™ prevent all crashes or loop-outs?

No. No riding system can prevent every crash, mistake, or loop-out. WELIXON™ is designed to help reduce loop-out risk by supporting angle-guided wheelie practice, but riders still need proper gear, safe riding space, responsible speed, and good judgment.

What is the difference between a Moxin controller purchased separately and the Anyland Rev Pro controller?

A separately purchased Moxin controller may offer advanced auto-wheelie controller capability, but it still needs to be matched correctly with the bike it is installed on.

The Anyland Rev Pro uses a WELIXON™ controller co-designed with Moxin and fine-tuned specifically for the Rev Pro’s motor, battery output, throttle behavior, frame balance, and riding setup. That tuning helps improve compatibility, stabilize power delivery, and make wheelie assist feel more predictable.

Is this only for beginners?

No. Beginners can use WELIXON™ to start learning wheelies with more confidence, while more experienced riders can use the higher angle settings to practice with a more consistent lift.

The system is designed for progression: start lower, build control, then move up when ready.

Can I turn Auto-Wheelie Assist off?

Yes. Riders can choose when to use Auto-Wheelie Assist based on their riding situation and skill level. For learning wheelies, we recommend starting with assist enabled and the lowest angle setting.

Does WELIXON™ make wheelies too easy?

No. WELIXON™ does not remove the need for rider skill. It helps make the learning process more predictable by assisting with angle management, but riders still need to have left-to-right balance, throttle feel, awareness, and body control.

The goal is not to fake skill. The goal is to help riders build it faster and with more confidence.

What protective gear should riders use?

Riders should wear a properly fitted helmet, gloves, long sleeves, long pants, closed-toe shoes, and protective pads. For wheelie practice, we strongly recommend extra protection and practice in a clear, open area.